Copyright © 2012 Fidelity Information Services, Inc.
Legal Notice
Copyright © 2012 Fidelity Information Services, Inc. All Rights Reserved
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts and no Back-Cover Texts.
GT.M™ is a trademark of Fidelity Information Services, Inc. Other trademarks are the property of their respective owners.
This document contains a description of GT.M and the operating instructions pertaining to the various functions that comprise the system. This document does not contain any commitment of FIS. FIS believes the information in this publication is accurate as of its publication date; such information is subject to change without notice. FIS is not responsible for any errors or defects.
March 20, 2012
Revision History | ||
---|---|---|
Revision 1.1 | 20 March 2012 | Improvements and corrections in “Upgrade Replication Instance File” and “New Qualifiers” sections. |
Revision 1.0 | February 22, 2012 | First published version. |
Contact Information
GT.M Group
|
|
Table of Contents
Effective V5.5-000, FIS GT.M adds a new type of replication, called Supplementary Instance (SI) replication. The previous sole replication mechanism is now called Business Continuity (BC) replication in order to distinguish between them.
At the time of writing, V5.5-000 is the only GT.M release to support SI replication. Should later releases exist when you peruse this technical bulletin, please read "V5.5-000 or later, as clarified or qualified by the release notes for your release" for "V5.5-000" below.
In this document, unless more specifically designated, the term "transaction" refers to all TP transactions - updates within TSTART/TCOMMIT brackets (with nested transactions, the outermost one), and all so-called "mini transactions" - individual updates (Sets, Kills, and ZKills) not within TSTART/TCOMMIT brackets.
GT.M replication was originally intended to provide business continuity for systems of record. For example with instances named Ardmore and BrynMawr, business logic processed on instance Ardmore can be streamed to instance BrynMawr so that should Ardmore ever go down, BrynMawr can immediately take over and provide continuity. In order to ensure that BrynMawr produces results consistent with Ardmore, BrynMawr can contain only material state information that is also in Ardmore.[1] To help ensure this consistency, GT.M BC replication prohibits locally generated database updates on a replicating secondary instance. Because they are conceptually part of atomic updates from the originating primary instance, GT.M triggers on replicating secondary instances are computed and committed locally.
Now consider an application such as running a report. This may require database updates including calculating and storing aggregates, statistics and interim results, or perhaps just to record the fact that the report was run. With traditional BC Replication, to offload such reporting from the originating primary instance is not a simple matter of running it on a replicating secondary instance, since updates are not permitted on replicating secondary instances.
SI replication allows replication from an instance (either Ardmore or BrynMawr in the example above) to another originating primary instance, Malvern. Malvern can execute its own business logic, computing and committing its own updates to its database, while receiving a replication stream. In turn, BC Replication from Malvern can provide it with its own replicating secondary instance, Newtown. In this example, only originating primary instances Ardmore and Malvern can execute business logic and compute database updates. Replicating secondary instances BrynMawr and Newtown are only permitted to receive and apply replication streams from their originating primary instances.
SI replication is intended to be a general purpose mechanism whose utility includes applications such as real-time decision support, warehousing, analytics and auditing.
This section presupposes an understanding of GT.M database replication and Logical Multi-Site (LMS) application configurations.
In order to create applications that remain available in the face of system and network failure, GT.M replication is asynchronous, which in turn means that the source and receiver ends of a replication connection are at an identical state only when there is no activity underway. To maintain consistency, and to restore it when restarting a replication connection, instances maintain a common, mutually coherent, instance-wide serial number called a journal sequence number. Since replication deals with an entire global variable name space, regardless of the mapping of global variables to database files, all updates participate in this numbering, even when modifying different database files.
When an originating primary instance and a replicating secondary instance connect, they establish the latest shared transaction (that is, the latest transaction they both have in common in their databases). If the instance configured as the secondary has any transactions in its database subsequent to that last transaction shared with the instance that is to be the primary, it rolls its database back to that last common transaction before beginning replication. The transactions that are rolled back go into an Unreplicated Transaction Log (previously known as a Lost Transaction File, a name we are retaining so as to not cause regressions). Identifying the common point for this rollback requires mutually coherent transaction ordering. Journal sequence numbers, while providing coherent transaction for BC replication do not suffice for SI replication.
To augment this capability for SI replication, journal sequence numbers are tagged with their origin- a stream # that can take on values 0 through 15 - and a stream sequence number - the journal sequence number of the update on the originating instance. Thus, of the journal sequence numbers in Malvern say 100, 101, and 102, if the first and third transactions are locally generated and the second is replicated, the tagged journal sequence numbers might be something like {100,0,10}, {101,1,18}, {102,0,11}. The 0 stream # for 100 and 102 indicates those transactions are generated locally on Malvern whereas stream # 1 indicates those transactions were generated in Ardmore. It is important to note that if, as part of restarting replication with Ardmore, Malvern needs to roll {101,1,18} off its database, database update serialization also requires it to roll {102,0,11} off as well, and both will appear in the Unreplicated Transactlon Log.
The same transaction that has a Malvern sequence number of 101 will have a different sequence number of 18 on Ardmore and BrynMawr. That is, the journal sequence number on Ardmore becomes the stream sequence number on Malvern. The replication instance file in Malvern contains information that allows GT.M to determine this mapping, so that when Malvern rolls {101,1,18} off its database, Ardmore knows that Malvern has rolled off Ardmore’s transaction 18.
If Malvern in turn implements BC replication to another instance Newtown, the tagging is propagated to Newtown, such that if Ardmore and Malvern both go down (e.g., if they are co-located in a data center that loses electricity), BrynMawr and Newtown can take over the functions of Ardmore and Malvern respectively, and Newtown can perform any synchronization needed in order to start accepting a replication stream from BrynMawr. as being a continuation of the updates generated by Ardmore, and BrynMawr in turn accepts Newtown as the successor to Malvern.
SI replication adds additional types of update related sequence numbers to those already in GT.M. This is an attempt to summarize in one place what they are and how they are related.
Every transaction applied to a database file increments the database transaction number for that file. Each block records the database transaction number at which it was updated, and the Current transaction field in the file header shows the value for the next transaction or mini-transaction to use. The following database file header fields all show database transaction numbers: Last Record Backup, Last Database Backup, Last Bytestream Backup, Maximum TN, and Maximum TN Warn.
Database transaction numbers are currently unsigned 64-bit integers.
While database activity uses database transaction numbers sequentially, not every transaction number can be found in a database block. For a Kill increments the database transaction number, but can remove blocks with earlier database transaction numbers from the database.
Note that database transaction numbers are updated in memory and only periodically flushed to secondary storage, so in cases of abnormal shutdown, the on-disk copies in the file header might be somewhat out-of-date.
While the database transaction number is specific to a database file, replication imposes a serialization of transactions across all replicated regions. As each transaction is placed in the Journal Pool it is assigned the next journal sequence number. When a database file in a replicated instance is updated, the Region Seqno field in the file header records the journal sequence number for that transaction. The journal sequence number for an instance is the maximum Region Seqno of any database file in that instance. While it uses them in processing, GT.M stores journal sequence numbers only in journal files. In database file headers, Zqgblmod Seqno and Zqgblmod Trans are journal sequence numbers.
Except for transactions in Unreplicated Transaction Logs, the journal sequence number of a transaction uniquely identifies that transaction on the originating primary instance and on all replicating secondary instances. When replicated via SI replication, the journal sequence number becomes a stream sequence number (see below) and propagated downstream, thus maintaining the unique identity of each transaction.
Journal sequence numbers cannot have holes - missing journal sequence numbers are evidence of abnormal database activity, including possible manual manipulation of the transaction history or database state.
Journal sequence numbers are 60-bit unsigned integers.
The receiver of a SI replication stream has both transactions that it receives via replication as well as transactions that it computes locally from business logic. As discussed earlier, while journal sequence numbers can uniquely identify a series of database updates, they cannot identify the source of those updates. Thus, V5.5-000 introduces the concept of a stream sequence number.
On an originating primary instance that is not the recipient of an SI replication stream, the journal sequence number and the stream sequence number are the same.
On a primary instance that is the recipient of an SI replication stream, the journal sequence number continues to uniquely identify and serialize all updates, whether received from replication or locally generated. However, there is also a stream sequence number, which is the journal sequence number for locally generated transactions, and for replicated updates, the combination of a non-zero 4 bit tag (i.e., with values 1 through 15) and the journal sequence number for the transaction on the system from which it was replicated. These stream sequence numbers are propagated to downstream replicating secondary instances.
Stream sequence numbers are 64-bit unsigned integers.
To make the following scenarios easier to understand, each update is prefixed with the system where it was originally generated and the sequence number on that system and any BC replicating secondary instances.
The three systems initially operate in roles O (Originating primary instance), R (BC Replicating secondary instance) and S (recipient of an SI replication stream).
Ardmore |
BrynMawr |
Malvern |
Comments |
---|---|---|---|
O: ... A95, A96, A97, A98, A99 |
R: ... A95, A96, A97, A98 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38 |
Ardmore as an originating primary instance at transaction number A99, replicates to BrynMawr as a BC replicating secondary instance at transaction number A98 and Malvern as a SI that includes transaction number A97, interspersed with locally generated updates. Updates are recorded in each instance's journal files using before-image journaling. |
Crashes |
O: ... A95, A96, A97, A98, B61 |
... M34, A95, M35, M36, A96, A97, M37, M38 |
When an event disables Ardmore, BrynMawr becomes the new originating primary, with A98 as the latest transaction in its database, and starts processing application logic to maintain business continuity. In this case where Malvern is not ahead of BrynMawr, the Receiver Server at Malvern can remain up after Ardmore crashes. When BrynMawr connects, its Source Server and Malvern’s Receiver Server confirms that BrynMawr is not behind Malvern with respect to updates received from Ardmore, and SI replication from BrynMawr picks up where replication from Ardmore left off. |
- |
O: ... A95, A96, A97, A98, B61, B62 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, B61, M40 |
Malvern operating as a supplementary instance to BrynMawr replicates transactions processed on BrynMawr, and also applies its own locally generated updates. Although A98 was originally generated on Ardmore, Malvern received it from BrynMawr because A97 was the common point between BrynMawr and Malvern. |
... A95, A96, A97, A98, A99 |
O: ... A95, A96, A97, A98, B61, B62, B63, B64 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, B61, M40, B62, B63 |
Malvern, continuing as a supplementary instance to BrynMawr, replicates transactions processed on BrynMawr, and also applies its own locally generated updates. Ardmore meanwhile has been repaired and brought online. It has to roll transaction A99 off its database into an Unreplicated Transaction Log before it can start operating as a replicating secondary instance to BrynMawr. |
R: ... A95, A96, A97, A98, B61, B62, B63, B64 |
O: ... A95, A96, A97, A98, B61, B62, B63, B64, B65 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, B61, M40, B62, B63, M41, B64 |
Having rolled off transactions into an Unreplicated Transaction Log, Ardmore can now operate as a replicating secondary instance to BrynMawr. This is normal BC Logical Multi-Site operation. BrynMawr and Malvern continue operating as originating primary instance and supplementary instance. |
Whereas in the last example Malvern was not ahead when starting SI replication from BrynMawr, in this example, asynchronous processing has left it ahead and must rollback its database state before it can receive the replication stream.
Ardmore |
BrynMawr |
Malvern |
Comments |
---|---|---|---|
O: ... A95, A96, A97, A98, A99 |
R: ... A95, A96, A97 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, M40 |
Ardmore as an originating primary instance at transaction number A99, replicates to BrynMawr as a BC replicating secondary instance at transaction number A97 and Malvern as a SI that includes transaction number A98, interspersed with locally generated updates. Updates are recorded in each instance's journal files using before-image journaling. |
Crashes |
O: ... A95, A96, A97 |
... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, M40 |
When an event disables Ardmore, BrynMawr becomes the new originating primary, with A97 the latest transaction in its database. Malvern cannot immediately start replicating from BrynMawr because the database states would not be consistent - while BrynMawr does not have A98 in its database and its next update may implicitly or explicitly depend on that absence, Malvern does, and may have relied on A98 to compute M39 and M40. |
- |
O: ... A95, A96, A97, B61, B62 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, B61 |
For Malvern to accept replication from BrynMawr, it must roll off transactions generated by Ardmore, (in this case A98) that BrynMawr does not have in its database, as well as any additional transactions generated and applied locally since transaction number A98 from Ardmore.[a] This rollback is accomplished with a mupip journal -rollback -fetchresync operation on Malvern.[b] These rolled off transactions (A98, M39, M40) go into the Unreplicated Transaction Log and can be subsequently reprocessed by application code.[c] Once the rollback is completed, Malvern can start accepting replication from BrynMawr.[d] BrynMawr in its Originating Primary role processes transactions and provides business continuity, resulting in transactions B61 and B62. |
- |
O: ... A95, A96, A97, B61, B62, B63, B64 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, B61, B62, M39a, M40a, B63 |
Malvern operating as a supplementary instance to BrynMawr replicates transactions processed on BrynMawr, and also applies its own locally generated updates. Note that M39a & M40a may or may not be the same updates as the M39 & M40 previously rolled off the database. |
[a] As this rollback is more complex, may involve more data than the regular LMS rollback, and may involve reading journal records sequentially; it may take longer. [b] In scripting for automating operations, there is no need to explicitly test whether BrynMawr is behind Malvern - if it is behind, the Source Server will fail to connect and report an error, which automated shell scripting can detect and effect a rollback on Malvern followed by a reconnection attempt by BrynMawr. On the other hand, there is no harm in Malvern routinely performing a rollback before having BrynMawr connect - if it is not ahead, the rollback will be a no-op. This characteristic of replication is unchanged from releases prior to V5.5-000. [c] GT.M's responsibility for them ends once it places them in the Unreplicated Transaction Log. [d] Ultimately, business logic must determine whether the rolled off transactions can simply be reapplied or whether other reprocessing is required. GT.M's $ZQGBLMOD() function can assist application code in determining whether conflicting updates may have occurred. |
In the example above, for Malvern to start accepting SI replication from BrynMawr with consistency requires it to rollback its database because it is ahead of BrynMawr. There may be applications where the design of the application is such that this rollback neither required nor desired. GT.M provides a way for SI replication to start in this situation without rolling transactions off into an Unreplicated Transaction File.
Ardmore |
BrynMawr |
Malvern |
Comments |
---|---|---|---|
O: ... A95, A96, A97, A98, A99 |
R: ... A95, A96, A97 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, M40 |
Ardmore as an originating primary instance at transaction number A99, replicates to BrynMawr as a BC replicating secondary instance at transaction number A97 and Malvern as a SI that includes transaction number A98, interspersed with locally generated updates. Updates are recorded in each instance's journal files using before-image journaling. |
Crashes |
O: ... A95, A96, A97, B61, B62 |
... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, M40 |
When an event disables Ardmore, BrynMawr becomes the new originating primary, with A97 the latest transaction in its database and starts processing application logic. Unlike the previous example, in this case, application design permits (or requires) Malvern to start replicating from BrynMawr even though BrynMawr does not have A98 in its database and Malvern may have relied on A98 to compute M39 and M40. |
- |
O: ... A95, A96, A97, B61, B62 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, M40, B61, B62 |
With its Receiver Server started with the -noresync option, Malvern can receive a SI replication stream from BrynMawr, and replication starts from the last common transaction shared by BrynMawr and Malvern. Notice that on BrynMawr no A98 precedes B61, whereas it does on Malvern, i.e., Malvern was ahead of BrynMawr with respect to the updates generated by Ardmore. |
Now consider a situation where Ardmore and Malvern are located in one data center, with BC replication to BrynMawr and Newtown respectively, located in another data center. When the first data center fails, the SI replication from Ardmore to Malvern is replaced by SI replication from BrynMawr to Newtown.
Ardmore |
BrynMawr |
Malvern |
Newtown |
Comments |
---|---|---|---|---|
O: ... A95, A96, A97, A98, A99 |
R: ... A95, A96, A97, A98 |
S: ... M34, A95, M35, M36, A96, M37, A97, M38 |
R: ... M34, A95, M35, M36, A96, M37 |
Ardmore as an originating primary instance at transaction number A99, replicates to BrynMawr as a BC replicating secondary instance at transaction number A98 and Malvern as a SI that includes transaction number A97, interspersed with locally generated updates. Malvern in turn replicates to Newtown. |
Goes down with the data center |
O: ... A95, A96, A97, A98, B61, B62 |
Goes down with the data center |
... M34, A95, M35, M36, A96, M37 |
When a data center outage disables Ardmore, and Malvern, BrynMawr becomes the new originating primary, with A98 as the latest transaction in its database and starts processing application logic to maintain business continuity. Newtown can receive the SI replication stream from BrynMawr, without requiring a rollback since the receiver is not ahead of the source. |
- |
O: ... A95, A96, A97, A98, B61, B62 |
- |
S: ... M34, A95, M35, M36, A96, M37, A97, A98, N73, B61, N74, B62 |
Newtown receives SI replication from BrynMawr and also applies its own locally generated updates. Although A97 and A98 were originally generated on Ardmore, Newtown receives them from BrynMawr. Newtown also computes and applies locally generated updates |
... A95, A96, A97, A98, A99 |
O: ... A95, A96, A97, B61, B62, B63, B64 |
... M34, A95, M35, M36, A96, M37, A97, M38 |
S: ... M34, A95, M35, M36, A96, M37, A97, A98, N73, B61, N74, B62, N75, B63, N76, B64 |
While BrynMawr and Newtown, keep the enterprise in operation, the first data center is recovered. Since Ardmore has transactions in its database that were not replicated to BrynMawr when the latter started operating as the originating primary instance, and since Malvern had transactions that were not replicated to Newtown when the latter took over, Ardmore and Malvern must now rollback their databases and create Unreplicated Transaction Files before receiving BC replication streams from BrynMawr and Newtown respectively. Ardmore rolls off A98 and A99, Malvern rolls off A97 and M38. |
R: ... A95, A96, A97, B61, B62, B63, B64 |
O: ... A95, A96, A97, B61, B62, B63, B64, B65 |
R: ... M34, A95, M35, M36, A96, M37, A97, A98, N73, B61, N74, B62, N75, B63, N76, B64 |
S: ... M34, A95, M35, M36, A96, M37, A97, A98, N73, B61, N74, B62, N75, B63, N76, B64, N77 |
Having rolled off transactions into an Unreplicated Transaction Log, Ardmore can now operate as a replicating secondary instance to BrynMawr. This is normal BC Logical Multi-Site operation. BrynMawr and Malvern continue operating as originating primary instance and supplementary instance. Note that having rolled A97 off its database, Malvern receives that transaction from Newtown as it catches up. |
GT.M V5.5-000 also introduces a mupip journal -rollback -backward -online feature that allows a database to be rolled back in state space while an application is in operation. This functionality is discussed in the release notes. Consider the following example where Ardmore rolls back its database.
Ardmore |
BrynMawr |
Malvern |
Comments |
---|---|---|---|
O: ... A95, A96, A97, A98, A99 |
R: ... A95, A96, A97 |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, M40 |
Ardmore as an originating primary instance at transaction number A99, replicates to BrynMawr as a BC replicating secondary instance at transaction number A97 and Malvern as a SI that includes transaction number A98, interspersed with locally generated updates. Updates are recorded in each instance’s journal files using before-image journaling. |
Rolls back to A96 with A97 through A99 in the Unreplicated Transaction Log |
Rolls back automatically to A96 (assume Receiver Server started with -autorollback - refer to the V5.5-000 Release Notes for details. |
- |
Instances receiving a replication stream from Ardmore can be configured to rollback automatically when Ardmore performs an online rollback by starting the Receiver Server with -autorollback. If Malvern’s Receiver Server is so configured, it will roll A97 through M40 into an Unreplicated Transaction Log. This scenario is straightforward. But with the -noresync qualifier, the Receiver Server can be started configured to simply resume replication without rolling back, and that scenario is developed here. |
O: ... A95, A96, A97a, A98a, A99a |
R: ... A95, A96, A97a, A98a |
S: ... M34, A95, M35, M36, A96, A97, M37, M38, A98, M39, M40, A97a, M41, A98a, M42 |
Transactions A97a through A99a are different transactions from A97 through A99 (which are in an Unreplicated Transaction File on Ardmore and must be reprocessed). Note that Malvern has both the original A97 and A98 as well as A97a and A98a. A99 was never replicated to Malvern - Ardmore rolled back before it was replicated, and A99a has not yet made it to Malvern (it will soon, unless Ardmore rolls back again) |
SI replication is only supported on POSIX editions of GT.M - in other words, it is not supported by GT.M on OpenVMS. Furthermore, with this release, GT.M no longer supports replication between OpenVMS and POSIX platforms, or on POSIX platforms with GT.M releases prior to V5.1-000. To upgrade to GT.M V5.5-000, or to upgrade from GT.M on OpenVMS to GT.M V5.5-000 on a POSIX platform, first upgrade to GT.M V5.1-000 or later on a POSIX platform as an intermediate step.
Although a receiver of SI replication can source a BC replication stream for downstream propagation, it cannot source an SI replication stream. So, in the example above, while Malvern can receive SI replication from Ardmore or BrynMawr, and it can source a BC replication stream to Newtown, which can in turn source a BC replication stream to Oxford. Thus, none of Malvern, Newtown or Oxford can source an SI replication stream.
Also an instance can only receive a single SI replication stream. Malvern cannot receive SI replication from an instance other than Ardmore (or an instance receiving BC replication from Ardmore, such as BrynMawr). Newtown or Oxford are replicating secondary instances and can receive no updates other than from Malvern.
The total number of replication streams that an instance can source is sixteen, with any combination of BC and SI replication.
Although V5.5-000 supports only one source stream for SI replication, the architecture allows for fifteen externally sourced streams (numbers 1 through 15), with stream 0 being locally generated updates. Under normal conditions, on a supplementary instance, one will see updates from streams 0 and 1. If the recipient of an SI stream has been moved from receiving replication from one source to another, you may see other stream numbers (corresponding to updates from other streams) as well.
When adding SI replication, the rules to remember are that (a) both source and receiver sides of SI replication must be V5.5-000, (b) upgrading an instance to V5.5-000 requires a new replication instance file because the replication instance file format for SI is not compatible with those of prior releases and (c) the -updateresync qualifier requires the name of a prior replication instance file when both source and receiver are V5.5-000.
Remember that except where an instance is an unreplicated sole instance, you should upgrade replicating secondary instances rather than originating primary instances. Starting with BC replication (e.g., Ardmore as originating primary and BrynMawr as replicating secondary), the simplest steps to start SI replication to Malvern are:
Bring BrynMawr down and upgrade it to V5.5-000. BrynMawr requires a new replication instance file. Please refer to the relevant release notes for details of upgrading database files and global directories; unless otherwise instructed by FIS, always assume that object and journal files are specific to each GT.M release.
Resume BC replication from Ardmore to BrynMawr. Since Ardmore is at an older GT.M release than V5.5-000, when starting the Receiver Server for the first time at BrynMawr, the -updateresync qualifier does not require the name of a prior replication instance file.
Create supplementary instance Malvern from a backup of BrynMawr or Ardmore, if that is more convenient. Malvern will require a new replication instance file, created with the -supplementary qualifier.
Start SI replication from BrynMawr to Malvern. Since Malvern and BrynMawr are both V5.5-000, the -updateresync qualifier used when the Malvern Receiver Server starts for the first time requires the old replication instance file copied, perhaps as part of a BACKUP, up from BrynMawr as its value.
At your convenience, once BrynMawr is upgraded you can:
Switchover so that BrynMawr is the originating primary instance with BC replication to Ardmore and SI replication to Malvern. This is unchanged from current LMS procedures. SI replication from BrynMawr to Malvern can operate through the switchover.
Bring Ardmore down and upgrade it to V5.5-000. It requires a new replication instance file.
Start BC replication from BrynMawr to Ardmore. Since Ardmore and BrynMawr are both V5.5-000, the -updateresync qualifier for Ardmore’s first Receiver Server start requires the name of a prior replication instance file. As it cannot use Ardmore’s pre-V5.5-000 format replication instance file, in this special case, use a backup copy from BrynMawr as that prior file.
To upgrade the replication instance file, perform the following steps:
Shut down all mumps, MUPIP and DSE processes except Source and Receiver Server processes; then shut down the Receiver Server (and with it, the Update Process) and all Source Server processes. Use MUPIP RUNDOWN to confirm that all database files of the instance are closed and there are no processes accessing them.
Rename the existing replication instance file after making a backup copy.
Create a new replication instance file (you need to provide the instance name and instance file name, either with command line options or in environment variables, as documented in the Administration and Operations Guide):
If this is instance is to receive SI replication (Malvern in the examples above) or to receive BC replication from an instance that receives SI replication (Newtown in the examples above), use the command:
mupip replicate -instance_create -supplementary
Otherwise use the command:
mupip replicate -instance_create
Prepare it to accept a replication stream:
Start a passive Source Server using the -updok flag.
Start a Source Server on a root or propagating primary instance to replicate to this instance. Verify that updates on the source instance are successfully replicated to the receiver instance.
The -updateresync qualifier indicates that instead of negotiating a mutually agreed common starting point for synchronization the operator is guaranteeing the receiving instance has a valid state that matches the source instance currently or as some point in the past. Generally this means the receiving instance has just been updated with a backup copy from the source instance.
![]() | |
A GT.M V5.5-000 instance can source a BC replication stream to or receive a BC replication stream from older GT.M releases, subject to limitations as discussed in the Limitations section of this document. It is only for SI replication that both source and recipient must both be V5.5-000. |
A supplementary instance cannot be the first or sole instance that you upgrade to V5.5-000 - you must already have created an instance running V5.5-000 to provide a replication stream to the supplementary instance.
You can create a supplementary instance from (a) a backup copy of another instance, a supplementary instance, an originating primary or replicating secondary by giving it a new identity, or (b) a freshly created, new instance. An instance used to create a supplementary instance must already be upgraded to V5.5-000.
Starting with a backup of another instance, follow the procedures above under Upgrade Replication Instance File using the -supplementary flag to the mupip replicate -instance_create command.
Creating a supplementary instance from a backup of an existing instance creates an SI replication instance with all the database state in the existing instance and is perhaps the most common application need. But there may be situations when a supplementary instance only needs new data, for example if it is to provide a reporting service only for new customers, and historical data for old customers is just excess baggage. In this case, you can also create a supplementary instance by creating a new instance, pre-loading it with any data required, enabling replication for the database files (since an Update Process will only apply updates to a replicated - and journaled - database region), and following the procedures above under above under Upgrade Replication Instance File using the -supplementary=on flag to the mupip replicate -instance_create command. Ship a replication instance file from the source to provide the -updateresync=filename qualifier required when starting the Receiver Server for the first time.
For starting SI replication on an originating primary supplementary instance (Malvern in the above example), the procedure is similar to a non-supplementary instance except that one also needs to start a receiver server (after having started a source server to set up the journal pool) to receive updates from the corresponding non-supplementary instance (Ardmore or BrynMawr in this case). Similarly, as part of shutting down the originating primary supplementary instance, an added step is to shut down the Receiver Server (if it is up and running) before shutting down the Source Server.
Remember that for GT.M replication, the Receiver Server listens at a TCP port and the Source Server connects to it. If the Receiver Server is not ahead of the Source Server, replication simply starts and streams updates from the source to the receiver. When the Receiver Server is ahead of the Source Server, the cases are different for BC and SI replication.
For either BC or SI replication, if the Receiver Server is started with the new -autorollback qualifier, it performs an online rollback of the receiving instance, so that it is not ahead of the originating instance, creating an Unreplicated Transaction Log of any transactions that are rolled off the database. When started without the -autorollback qualifier, a Receiver Server notified by its Source Server of a rollback, logs the condition and exits so an operator can initiate appropriate steps.
For SI replication the new -noresync qualifier tells the Receiver Server not to rollback the database even if the receiver is ahead of the source. In this case, the Source Server starts replication from the last journal sequence number common to the two instances.
When changing the source of a supplementary replication stream to another in the same family of instances (for example in the example where Ardmore and Malvern crash and Newtown is to receive a replication stream from BrynMawr, start the Receiver Server normally (with either -autorollback or -noresync, as appropriate) and allow BrynMawr to connect to it. Instead of using -autorollback, you can also perform a mupip journal -rollback -backward -fetchresync before starting the Receiver Server.
To migrate a supplementary instance from receiving SI replication from one set of BC instances to a completely different set - for example, if Malvern is to switch from receiving SI replication from the set of {Ardmore, BrynMawr} to a completely unrelated set of instances {Pottstown, Sanatoga}
SI replication adds and modifies qualifiers to the MUPIP REPLICATE and MUPIP JOURNAL commands.
-updateresync=filename
Used when starting a Receiver Server on an instance where the replication instance file has no history records (usually because the instance file was newly created). The -updateresync qualifier now requires the file name of a replication instance file if the source of the replication stream is running GT.M V5.5-000 or higher, but not if the source is running a GT.M release prior to GT.M V5.5-000. This helps the Receiver Server by using history records from the input instance file (instead of the receiver instance file which has no history records) to exchange history information with the source and ensure both instances are in sync before safely starting replication. Previously there was no verification of history records in case of -updateresync usage and this opened up a safely hole in GT.M replication. For example, in the case where a receiver of an SI replication stream is started for the first time (the receiver and source have not communicated since the receiver replication instance file was created), this qualifier requires the name of a replication instance file (which is not the current replication instance file of the secondary instance) that is obtained from a backup of the source instance (taken at the same time the source databases were backed up). In this case, the Receiver Server startup should happen only after ensuring the backed up source database has been loaded onto the receiver instance. Once the receiver (started with -updateresync) and source connect, the Update Process logs a message containing the string "New History Content". The -updateresync should no longer be used for future Receiver Server startups. Note that the updateresync qualifier is not upward compatible from older releases of GT.M that never required a file name. Although FIS tries hard to keep GT.M upward compatible, our judgment is that this incompatibility represents the best option for adding the new SI replication functionality as well as enhancing the robustness of existing BC replication. Note that this qualifier was needed only in uncommon situations in GT.M V5.5-000 and prior releases. V5.5-000 make the need even more uncommon by eliminating it in the case where the instance has been recreated using a backup of another instance. This is because of a change to mupip replic -editinstance command which now supports a -name qualifier. For more details, refer to GT.M V5.5-000 Release notes.
-autorollback
Used when starting a Receiver Server. The command mupip replicate -receiver -start -autorollback allows the receiving instance of SI or BC replication to roll back as required when the source instance rolls back with a mupip journal -rollback -backward command. For more information on this flag, refer to GT.M V5.5-000 Release notes.
![]() | |
As autorollback uses mupip online rollback under the covers, it should be considered field test grade functionality as long as that function is considered field test grade functionality. |
-noresync -
Used when starting a Receiver Server. The command mupip replicate -receiver -start -noresync instructs the Receiver Server to accept a SI replication stream even when the receiver is ahead of the source. In this case, the source and receiver servers exchange history records from the replication instance file to determine the common journal stream sequence number and replication resumes from that point onwards. Specifying -noresync on a BC replication stream is disallowed with a NORESYNCSUPPLONLY error. Use of -noresync on a SI replication stream receiver server where the receiving instance was started with -UPDNOTOK (updates are disabled) is disallowed with a NORESYNCUPDATERONLY error. Note also that the noresync qualifier is not the opposite of the resync qualifier of rollback (mupip journal -rollback -resync), which is intended for use under the direction of FIS GT.M support.
-resume=<strm_num>
Used when starting a Receiver Server of an SI replication stream with -updateresync in case the receiver instance has previously received from the same source but had only its instance file (not database files) recreated in between (thereby erasing all information about the source instance and the stream number it corresponds to recorded in the receiver instance file). In this case, the command mupip replic -receiv -start -updateresync=<instfile> -resume=<strm_num>, where <strm_num> is a number from 1 to 15, instructs the receiver server to use the database file headers to find out the current stream sequence number of the receiver instance for the stream number specified as <strm_num>, but uses the input instance file (specified with -updateresync) to locate the history record corresponding to this stream sequence number and then exchange history with the source to verify the two instances are in sync before resuming replication. Note that in case -resume is not specified and only -updateresync is specified for a SI replication stream, it uses the input instance file name specified with -updateresync to determine the stream sequence number as well as provide history records to exchange with the source instance (and verify the two are in sync). Assuming that instance files are never recreated (unless they are also accompanied by a database recreate), this qualifier should not be required in normal usage situations.
-reuse=<instname>
Used when starting a Receiver Server of an SI replication stream with -updateresync in case the receiver instance has previously received from fifteen (all architecturally allowed) different externally sourced streams and is now starting to receive from yet another source stream. The command mupip replic -receiv -start -updateresync=<instfile> -reuse=<instname>, where <instname> is the name of a replication instance, instructs the receiver server to look for an existing stream in the replication instance file header whose “Group Instance Name” (displayed by a mupip replic -editinstance -show command on the receiver replication instance file) matches the instance name specified and if one does, reuse that stream number for the current source connection (erasing any record of the older Group using the same stream number).
-rsync_strm=<strm_num>
Used when starting a rollback command with the -resync qualifier. The command mupip journal -rollback -resync= -rsync_strm=<strm_num> instructs rollback to roll back the database to a sequence number specified with the -resync=<sequence_num> qualifier but that <sequence_num> is a journal stream sequence number (not a journal sequence number) corresponding to the stream number <strm_num> which can be any value from 0 to 15. Note that like the -resync qualifier, the -rsync_strm qualifier is also intended for use under the direction of your GT.M support channel.
-supplementary
Used when creating a replication instance file. The command mupip replicate -instance_create -supplementary creates a replication instance file suitable for use in a supplementary instance. To create a replication instance file that is suitable for use in a non-supplementary instance, use the same command but without the -supplementary qualifier.
-updnotok
Used when starting a Source Server. The command mupip replicate -source -start -updnotok instructs the Source Server to not allow local updates on this instance. This is a synonym for the already existing -propagateprimary qualifier but is named so it better conveys its purpose.
-updok
Used when starting a Source Server. The command mupip replicate -source -start -updok instructs the Source Server to allow local updates on this instance. This is a synonym for the already existing -rootprimary qualifier but is named so it better conveys its purpose.
See the Error Messages and Recovery Guide and V5.5-000 Release Notes.
[1] Non-material information in the database may be information that identifies the instance, local process ids, system load, etc.